Mobotix T24 Informacje Techniczne Pobierz pdf (Strona 104)

104/118

T24 System Manual Part 2: System Restore

www.mobotix.com • [email protected]

A special system restore procedure is required after exchanging modules. It is described

in 5.2.1– 5.2.6 below.

5.2.1 Exchanging T24KeypadRFID– With System Restore

You need to disconnect the door station’s power supply

before exchanging the keypad. To restore the system after

exchanging it, you will need an up-to-date backup of the

system conﬁguration.

Proceed As Follows:

1. Disconnect the door station from the power supply (for

example, remove the network plug).

2. Remove the keypad to be exchanged from the module frame as described in the

T24 System Manual Part 1/Section 2.4.6 (Removing And Exchanging Modules).

Exchange the keypads. Take care not to damage the cabling or mix up the connections.

The connection diagrams are provided in the T24 System Manual Part 1.

4. Reconnect the power supply, wait until the system has booted and run a system

restore via the video phone, as described in 5.2. The door station is now ready

for operation and can once again be used with the PINs and transponder cards

set up for your system.

5.2.2 Exchanging T24-DoorMaster– With System Restore

You need to disconnect the door station’s power supply before

exchanging the T24-DoorMaster. To restore the system after

exchanging it, you will need an up-to-date backup of the

system conﬁguration.

Proceed As Follows:

Disconnect the door station from the power supply (for example, remove the network

plug).

2. Exchange the T24-DoorMaster. Take care not to damage the cabling or mix up the

connections. The connection diagrams are provided in the T24 System Manual Part 1.

3. Reconnect the power supply, wait until the system has booted and run a system

restore via the video phone, as described in 5.1. The door station is now ready

for operation and can once again be used with the PINs and transponder cards

set up for your system.

Contact your MOBOTIX

support team to

exchange a (used)

T24-KeypadRFID

and T24-DoorMaster

that no longer have

factory default con-

dition (the devices

will need to undergo

a hardware reset)

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 119 120

Komentarze do niniejszej Instrukcji

Brak uwag

Mobotix T24 Informacje Techniczne Strona 104

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Mobotix T24