Mobotix T24 Informacje Techniczne Pobierz pdf (Strona 31)

31/118

Step 2: Setting Up The Keypad

www.mobotix.com • [email protected]

2.2.1 Enter The Super PIN

You require the Super PIN during the initial startup of the keypad. The Super PIN is used

to protect your system. In an emergency, the Super PIN can be used in place of the admin

card for authentication on the keypad. The Super PIN therefore also allows you to erase

cards or set up a new access PIN.

The Super PIN should not have a series of zeros only and it must be dicult for unauthorized

persons to guess. Select a number that has at least eight and no more than 16 digits (using

the digits 0–9). The more digits the number has, the more secure it is.

Make a note of your personal Super PIN immediately in your T24 User Data Record Card

(see Section 3.2.2). Step 3 of the system startup process requires you to enter your Super

PIN on the videophone for authentication purposes (see Section 2.3.2).

Enter The Super PIN

The keypad shows the ﬂashing pattern of the successfully completed auto- conﬁguration

process (ESC/ALARM ﬂashes red, OK/MENU ﬂashes blue).

Enter your personal Super PIN and press the OK/MENU button (which then ﬂashes

blue even faster).

3. Re-enter your Super PIN and press the (quickly ﬂashing) OK/MENU button again.

4. A ﬂashing ring pattern on the keypad conﬁrms entry of the Super PIN.

After approximately ten seconds, the number buttons on the keypad light up white

continuously, the keypad bell button, key button and OK/MENU button ﬂash blue

and the ESC/ALARM button ﬂashes red. Continue with Section 2.2.2.

Note

If you make an incorrect entry (for example, you enter two dierent Super PINs) or if you

wait longer than 60 seconds between two entries, a warning beep will sound and the

keypad will return to the original state it was in after auto-conﬁguration (number buttons

will ﬂash white). Repeat the procedure for entering the Super PIN, as described here.

0 9

Super PIN

0 9

Super PIN

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 119 120

Brak uwag

Mobotix T24 Informacje Techniczne Strona 31