Mobotix MX-KEYPAD1-EXT-SV Informacje Techniczne Pobierz pdf (Strona 102)

102/148

T24 System Manual Part 1: Installation

www.mobotix.com • [email protected]

Preparing The Cavity Socket (Cavity Wall)

The T24-DoorMaster can be mounted to a cavity wall (for example, plasterboard up to a

thickness of 35 mm) using either the supplied cavity socket or an existing socket. Push the

cavity socket into the prepared drill hole (68 mm) in the cavity wall and secure it by tightening

the clamp screws. The metal claws automatically pop out and clamp the socket ﬁrmly.

After connecting the cables, secure the housing and board directly to the cavity socket by

fastening two small screws in the a and b positions (see ﬁg.) This requires that the socket

is properly installed in the wall.

As in the case of the in-wall socket, you can also use four or two screws/screw anchors

(diagonally opposite one another) to tightly screw the housing to the wall.

B '+, b2$ * 1*7&+4

2"16$+ 13++$#

P1"3'+$#2 '6 5"<$ 13++$#Q

S5$' +5$ 21#$-2

*#$ +&@5+$'$;A +5$

)$+*< 1<*-2 *3+")*+ 1*<<4

>"> "3+ *'; 1<*)>

+5$ 2"16$+ +" +5$

1*7&+4 -*<< P)*;$ "(

-""; "# ><*2+$#/"*#;A

("# $0*)><$Q

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 149 150

Brak uwag

Mobotix MX-KEYPAD1-EXT-SV Informacje Techniczne Strona 102