Mobotix MX-KEYPAD1-EXT-SV Informacje Techniczne Strona 123

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 150
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 122
123/148
Finishing The Installation
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
The signal output option is set on the T24-DoorMaster in three steps as part of
system startup.
Step 1: Press both buttons at the same time for 5 seconds (until double beep)
You are now in administration mode (red LED turns o shortly every 3 seconds).
Step 2: Press door opener button (right) to configure the signal output option
You can switch between signal output options 1 to 3 by pressing the right button repeatedly.
The flashing pattern of the blue LED signals the currently selected setting.
Blue flashing 1x every 3 seconds: Self-powered
Blue flashing 2x every 3 seconds: Relay
Blue flashing 3x every 3 seconds: Mediator
Step 3: Press both buttons at the same time for 5 seconds (until double beep)
The setting has been saved and you are exiting administration mode.
Notes
Test that the T24-DoorMaster is functioning by pressing and holding the door opener
button for 3 seconds. It should now be possible to open the door from the outside.
Przeglądanie stron 122
1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 149 150

Komentarze do niniejszej Instrukcji

Brak uwag